ASIC

Answers to all of your questions regarding minerstat's ASIC monitoring and management software.

How to prepare your monitoring device for ASIC Hub?

Not all monitoring devices have all necessary dependencies installed right away. To ensure that ASIC Hub will run smoothly, you can follow this guide to preinstall dependencies needed to run ASIC Hub. Read more →

How can I set up ASIC monitoring software?

ASIC Hub ASIC Hub is installed on a separate Linux, Mac, or Raspberry Pi computer and acts like a server - receiving and sending data between ASICs and minerstat dashboard. If you want to use ASIC Hub on Windows computer, you can install a VM that ... Read more →

ASIC Hub troubleshooting

Most common mistakes The most common reasons for ASIC Hub not syncing with your machines are: Invalid local IP; ASIC Hub is unable to reach local IP as it is installed on a device that is in different network or location; Wrong group used... Read more →

Which Antminer firmware is supported?

ASIC Hub works well with most of the custom firmware software and doesn't interrupt with the performance of the firmware. This means that you can use minerstat monitoring and management services with other software upgrades as well. Read more →

Can I change IP address of ASIC worker?

Yes, you can - open your workers list and find your ASIC worker. After that, click on the pencil icon to edit the worker. Read more →

What are my ASIC's SSH credentials?

Each ASIC machine has its own SSH credentials. If you did not change them at any point, one of the following will probably be available for you to use. Read more →

Find Antminer IP address

If you own an ASIC (either Antminer or any other brand) or more of them and you want an find its IP address in a quick and easy way, we suggest you to check Locator. Locator Locator is a free software that can be used by anyone (so it is not lim... Read more →

ASIC Hub was installed but worker is still offline

If a worker doesn't come online after few minutes and your ASIC Hub installation was successful, double check: You have added worker under correct system (if you have Antminer, you must select Antminer). You can check and edit this by clicki... Read more →

ASIC Hub was installed but worker isn't mining

There can be a case when you install ASIC Hub on your ASIC and worker shows as online but mining "Unknown coin", the speed is zero, and worker's details tell you that the hardware is undetected. For ASIC Hub there could be a case of u... Read more →

How to set up Bitmain Antminer?

You can monitor and manage any of the Bitmain's Antminers on minerstat with ASIC Hub. ASIC Hub is supported on all Bitmain's Antminer ASICs. Read more →

How to set up Innosilicon ASIC?

You can monitor and manage Innosilicon's ASICs on minerstat with ASIC Hub. ASIC Hub ASIC Hub works on the latest Innosilicon models. Read more →

How to set up MicroBT Whatsminer?

You can monitor and manage MicroBT's Whatsminer ASICs on minerstat with ASIC Hub. ASIC Hub ASIC Hub works on the latest MicroBT's Whatsminer models. Read more →

How to set up Dayun Zig?

You can monitor and manage Dayun's Zig ASICs on minerstat with ASIC Hub. ASIC Hub ASIC Hub works on the latest Dayun's Zig models. Read more →

How to set up Spoondolies ASIC?

You can monitor and manage Spoondolies ASICs on minerstat with ASIC Hub. ASIC Hub ASIC Hub can be used for mining monitoring and management of Spoondolies ASIC. Read more →

How to set up Ebang Ebit ASIC?

You can monitor and manage Ebang Ebit's ASICs on minerstat with ASIC Hub. ASIC Hub ASIC Hub has the following features. Read more →

How to set up Fusionsilicon ASIC?

You can monitor and manage Fusionsilicon's ASICs on minerstat with ASIC Hub. ASIC Hub ASIC Hub has the following features. Read more →

How to set up StrongU ASIC?

You can monitor and manage StrongU's ASICs on minerstat with ASIC Hub. ASIC Hub ASIC Hub has the following features. Read more →

How to set up Obelisk ASIC?

You can monitor and manage Obelisk's ASICs on minerstat with ASIC Hub. ASIC Hub ASIC Hub has the following features. Read more →

How to install Locator on Raspberry Pi

If you want to use Locator software on your Raspberry Pi, the installation procedure is the following. Open Terminal Enter wget https://github. Read more →

How to forward traffic with ngrok?

ngrok is a special software that allows forwarding traffic through a public URL. It is really convenient for creating a public endpoint for any kinds of development as it is modern alternative to VPN. Read more →

Other categories