Alerts overview

There are several alerts available on minerstat that can help you get notified about important events.

GPU temperature alert is checked every minute and notifies you once the temperature of any GPU reaches a certain level that is selected in the settings.

Possible settings: 60°C, 65°C, 60°C, 70°C, 75°C, 80°C, 85°C, 90°C, 95°C.

Offline alert is checked every minute and notifies you once the worker is offline for as long as the time selected in the settings.

Possible settings: 4 minutes, 6 minutes, 8 minutes, 10 minutes, 15 minutes, 30 minutes.

Since some ASICs machines have longer syncing time, we have added additional 6 minutes window for ASIC to be detected as offline. In other words, ASIC will be detected as offline 6 minutes after its last sync. This means that if you set 4 minutes and your ASIC went offline, you will get an alert 10 minutes (6+4) after ASIC last synced.

Inactive alert is checked every minute and notifies you once the worker becomes inactive for as long as the time selected in the settings. Worker is inactive when it is connected and sycing, but it doesn't mine.

Possible settings: 4 minutes, 6 minutes, 8 minutes, 10 minutes, 15 minutes, 30 minutes.

Online alert is checked every minute and notifies you the worker came online after worker is online for the time selected in the settings.

Possible settings: 4 minutes, 6 minutes, 8 minutes, 10 minutes, 15 minutes, 30 minutes.

ASIC notifications alert is checked every minute and notifies you about certain hardware errors and high temperatures on your ASIC machines after the time selected in the settings.

Possible settings: 4 minutes, 6 minutes, 8 minutes, 10 minutes, 15 minutes, 30 minutes.

Hashrate drop is checked every 10 minutes and notifies you once the hashrate dropped by a certain percentage that is selected in the settings.

Possible settings: 5%, 10%, 20%, 30%, 40%, 50%.

Note: Since hashrate drop alert checks charts and historical data of the rig, it won't get detected immediately, but with a minimum 10-minute delay. If hashrate drops to 0 MH/s, this means that the rig stopped mining and the event isn't detected as a hashrate drop.

Consumption decrease is checked every 10 minutes and notifies you once the consumption dropped by a certain percentage that is selected in the settings.

Possible settings: 5%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%.

Note: Since consumption decrease alert checks charts and historical data of the rig, it won't get detected immediately, but with a minimum 10-minute delay. If consumption drops to 0 W, this means that the rig stopped mining and the event isn't detected as a consumption decrease.

Consumption increase is checked every 10 minutes and notifies you once the consumption increased by a certain percentage that is selected in the settings.

Possible settings: 5%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%.

Note: Since consumption increase alert checks charts and historical data of the rig, it won't get detected immediately, but with a minimum 10-minute delay.

Efficiency rate drop is checked every 10 minutes and notifies you once the efficiency dropped by 10%.

Possible settings: 10%.

Note:  Since efficiency drop alert checks charts and historical data of the rig, it won't get detected immediately, but with a minimum 10-minute delay. If efficiency drops to 0%, this means that the rig didn't function properly (as no accepted shares were detected) and the event isn't detected as an efficiency drop.

Changelog is checked every hour and notifies you if there was something new released by minerstat team. Changelog alert is only available in a paying plan.

You get notified as soon as a task is assigned to you. New task alert is only available in a paying plan.

You get notified as soon as a task you created is marked as completed. Completed task alert is only available in a paying plan.