Dual mining: How to mine ETC+ZIL with Nanominer

In this guide we will show you hot to set up ETС+ZIL mining via Nanominer with minerstat.

The same process applies to RVN+ZIL, CFX+ZIL and ERGO+ZIL. You need to make sure that you're using proper combination of coin, pool stratum address and wallet address for each of those coins.

Pools

For this method you need a primary pool where you mine most of the time and secondary pool where you mine ZIL. We're using Ezil.me in this example.

First, open the address editor and add a new tag (POOL:ZIL) which will hold the Ezil.me stratum address. There are several ports available, so choose one of the following stratum addresses:

  • eu.ezil.me:5555
  • asia.ezil.me:5555
  • us-east.ezil.me:5555
  • us-west.ezil.me:5555
  • cn.ezil.me:5555

Second, make sure you have a pool for ETH saved under (POOL:ETC). In this tutorial we'll be using 2miners.

  • etc.2miners.com:1010

Wallet

In the next step you need to save your wallet address to your address editor. Create new tag (WALLET:ZIL) under wallets with your ZIL wallet address (starting with zil) For example: zil1wvl33k4ld3grp0qmg88fxk3mka90pg7ckrjnc3

Create another tag (WALLET:ETC) under wallets with your ETC wallet address (starting with 0x) For example: 0x03E49A6f9e87Edd5933cEF2640B9ceC1827B36A1

Worker's config

In the next step, navigate to you worker's config. Select nanominer and then use simple configuration for the initial part of configuration. You will need to use advanced config to add the ZIL mining options.

Note You can save the simple config and test mining on the ETC pool you've selected to make sure there are no errors in the simple config before you proceed with adding the ZIL options.

Simple Config

Here we need to select the following:

  • Coin: ETC
  • Pool: (POOL:ETC)
  • Wallet: (WALLET:ETC)
  • Password: x

Advanced config

Now, click the pencil button below the coin, pool and wallet selection menus to edit the config that simple editor has generated in advanced mode.

Let's add our ZIL part of the configuration. Using the tags we created, add this to the end of the configuration line:

-algo zil -pool1 (POOL:ZIL) -wallet (WALLET:ZIL) -rigName (WORKER) -rigPassword x

Here's an example of the complete ETH + ZIL mining config:

-algo etchash -pool1 (POOL:ETC)⁣ -wallet (WALLET:ETC)⁣ -rigName (WORKER)⁣ -rigPassword x -algo zil -pool1 (POOL:ZIL) -wallet (WALLET:ZIL) -rigName (WORKER) -rigPassword x

Now you've setup the advanced configuration. Most of the time, the miner is going to be mining the main coin on the main pool you've selected and will switch to mining ZIL on ZIL pool once the round for it comes, switching back when it's over.

Note The miner also automatically configures caching a copy of the ZIL epoch 0 DAG when using this mode.

To monitor specifically your ZIL mining stats, you can open the pool's website and lookup it as following: 0xffffffffffffffffffffffffffffffffffffffff.zilYourZilAddressHere, for example: 0xffffffffffffffffffffffffffffffffffffffff.zil1wvl33k4ld3grp0qmg88fxk3mka90pg7ckrjnc3

Improve your mining operation with minerstat

It's easy and free to get started

Sign up now